Version History
Here you can find the changelog of Bluetooth+ for Blackmagic since it was posted on our website on 2020-06-01.
The latest version is 2.3.3 and it was updated on soft112.com on 19 April, 2024.
See below the changes in each version:
version 2.3.3
posted on 2022-07-30
Jul 30, 2022 Version 2.3.3
- Fixes an issue introduced in firmware v7.9 where the app can't stop recording
- Fixes focus direction being swapped on firmware v7.9 for Pocket 4K users
- For Ursa Mini Pro users, fixes an issue where the app can cause the camera to power back on after walking away and coming back in range of the camera
version 2.3.1
posted on 2021-06-08
Jun 8, 2021 Version 2.3.1
Fixes an issue where certain Nucleus-M models would not be found by Bluetooth+
-- NEW External Controllers --
Connect Tilta Nucleus Nano & Nucleus-M to control Focus, Iris and Zoom, as well as Start & Stop Recording.
Zoom and Focus control are only supported on Pocket 4K.
This is part of the new Pro feature set, which also includes Multi-Cam mode. Anyone that has already purchased Multi-Cam automatically gets access to all Pro features. More features will continue to be added to Pro over time.
Aaaaannd, you can now give nicknames to your cameras. Hooray.
More good things on the way!
version 2.3
posted on 2021-05-27
May 27, 2021 Version 2.3
-- NEW External Controllers --
Connect Tilta Nucleus Nano & Nucleus-M to control Focus, Iris and Zoom, as well as Start & Stop Recording.
Zoom and Focus control are only supported on Pocket 4K.
This is part of the new Pro feature set, which also includes Multi-Cam mode. Anyone that has already purchased Multi-Cam automatically gets access to all Pro features. More features will continue to be added to Pro over time.
Aaaaannd, you can now give nicknames to your cameras. Hooray.
More good things on the way!
version 2.2
posted on 2021-04-17
Apr 17, 2021 Version 2.2
-- BRAND NEW Apple Watch App --
Completely revamped Apple Watch app. You can now control almost all camera settings right from your wrist. You still need to connect via your iPhone, but once connected, you can start/stop recording, change presets , do almost anything you could want.
-- Camera Presets --
You can now save and recall camera settings at the tap of a button.
Moving from an interior to exterior shot? Have different settings for high-speed recording? Just save your presets and switch between almost any/all camera settings in just a second.
-- Pocket 6K Pro Support --
Control the built-in NDs on the Pocket 6K Pro, as well as full codec & resolution support.
Stay tuned for some more exciting updates soon!
version 2.1
posted on 2020-10-27
Oct 27, 2020 Version 2.1
. Audio Level Controls, with some limitations:
- Levels can be set from Bluetooth+, but changes made on camera are not sent to the app, so we recommend validating settings before recording
- Input source selection is limited to either Internal Mics, or XLR
- Changing the Input Source setting on Ursa Mini Pro will change the setting for both audio channels, on Pocket Cameras it can only change Channel 1 input
. Added False Color control (currently supported on Pocket cams only)
. iPad UI fixes
MULTI-CAM MODE IS HERE
This represents a lot of work, and behind the scenes, a complete re-write of Bluetooth+
Multi-Cam Mode is available via a one-time in-app purchase. With Multi-Cam Mode, you'll get these fantastic features:
. Control up to 12 Blackmagic cameras at once
. Create up to 3 distinct Control Groups, to give you fine-grain control over different settings for different cameras
. You can choose to have changes made on one camera automatically update all the other cameras in its Control Group
. Give your cameras Nicknames for quick, easy control
Multi-Cam gives you control over the following features synced across the entire Group:
. Start/Stop Recording
. White Balance + Tint
. Project frame rate (off-speed frame rates not supported)
. Shutter Angle/Speed
. ISO
. Overlays (Zebras, Frame Guides, Grids, Focus Assist)
. Slate
. Trigger Auto-focus
You can still control all other settings on a camera-by-camera basis, including:
. Trigger stills capture
. Iris control
. Focus + Zoom (on supported lenses)
. Codec + Resolution
. Playback control
. You can also set ISO specifically, rather than by camera group, for cases where you may have a mix of Pocket cams and Ursa Minis in the same Control Group
version 2.0.2
posted on 2020-10-26
Oct 26, 2020 Version 2.0.2
. Adds False Color control (currently supported on Pocket cams only)
. iPad UI fixes
MULTI-CAM MODE IS HERE
This represents a lot of work, and behind the scenes, a complete re-write of Bluetooth+
Multi-Cam Mode is available via a one-time in-app purchase. With Multi-Cam Mode, you'll get these fantastic features:
. Control up to 12 Blackmagic cameras at once
. Create up to 3 distinct Control Groups, to give you fine-grain control over different settings for different cameras
. You can choose to have changes made on one camera automatically update all the other cameras in its Control Group
. Give your cameras Nicknames for quick, easy control
Multi-Cam gives you control over the following features synced across the entire Group:
. Start/Stop Recording
. White Balance + Tint
. Project frame rate (off-speed frame rates not supported)
. Shutter Angle/Speed
. ISO
. Overlays (Zebras, Frame Guides, Grids, Focus Assist)
. Slate
. Trigger Auto-focus
You can still control all other settings on a camera-by-camera basis, including:
. Trigger stills capture
. Iris control
. Focus + Zoom (on supported lenses)
. Codec + Resolution
. Playback control
. You can also set ISO specifically, rather than by camera group, for cases where you may have a mix of Pocket cams and Ursa Minis in the same Control Group
version 2.0.1
posted on 2020-10-20
Oct 20, 2020 Version 2.0.1
MULTI-CAM MODE IS HERE
This represents a lot of work, and behind the scenes, a complete re-write of Bluetooth+
Multi-Cam Mode is available via a one-time in-app purchase (get in quick for special launch price). With Multi-Cam Mode, you'll get these fantastic features:
- Control up to 12 Blackmagic cameras at once
- Create up to 3 distinct Control Groups, to give you fine-grain control over different settings for different cameras
- You can choose to have changes made on one camera automatically update all the other cameras in its Control Group
- Give your cameras Nicknames for quick, easy control
Multi-Cam gives you control over the following features synced across the entire Group:
- Start/Stop Recording
- White Balance + Tint
- Project frame rate (off-speed frame rates not supported)
- Shutter Angle/Speed
- ISO
- Overlays (Zebras, Frame Guides, Grids, Focus Assist)
- Slate
- Trigger Auto-focus
You can still control all other settings on a camera-by-camera basis, including:
- Trigger stills capture
- Iris control
- Focus + Zoom (on supported lenses)
- Codec + Resolution
- Playback control
- You can also set ISO specifically, rather than by camera group, for cases where you may have a mix of Pocket cams and Ursa Minis in the same Control Group
--Other changes--
- Adds dedicated Autofocus button to Focus screen
- Fixes a bug where app could crash when accessing settings in Multi-Cam mode
- Fixes a bug where app could crash when tapping a camera in Multi-Cam mode on iPad
- Minor bug fixes
- Minor UI tweaks
version 2.0
posted on 2020-10-17
Oct 17, 2020 Version 2.0
MULTI-CAM MODE IS HERE
This represents a lot of work, and behind the scenes, a complete re-write of Bluetooth+
Multi-Cam Mode is available via a one-time in-app purchase (get in quick for special launch price). With Multi-Cam Mode, you'll get these fantastic features:
- Control up to 12 Blackmagic cameras at once
- Create up to 3 distinct Control Groups, to give you fine-grain control over different settings for different cameras
- You can choose to have changes made on one camera automatically update all the other cameras in its Control Group
- Give your cameras Nicknames for quick, easy control
Multi-Cam gives you control over the following features synced across the entire Group:
- Start/Stop Recording
- White Balance + Tint
- Project frame rate (off-speed frame rates not supported)
- Shutter Angle/Speed
- ISO
- Overlays (Zebras, Frame Guides, Grids, Focus Assist)
- Slate
- Trigger Auto-focus
You can still control all other settings on a camera-by-camera basis, including:
- Trigger stills capture
- Iris control
- Focus + Zoom (on supported lenses)
- Codec + Resolution
- Playback control
- You can also set ISO specifically, rather than by camera group, for cases where you may have a mix of Pocket cams and Ursa Minis in the same Control Group
--Other changes--
- Fixed Slate-only mode
version 1.5
posted on 2020-09-27
27 Sep 2020 Version 1.5
Thanks everyone for your feedback and input. A good few things new in this update. It is strongly recommended that you are running the latest firmware from Blackmagic to enjoy the most reliable Bluetooth+ experience.
NEW FEATURES
. Ursa Mini Pro 12K support
. Zoom feature for supported lenses (generally MFT lenses + Pocket 4K)
. Stills capture button - requires latest firmware. Ursa Mini Pro G2 currently unsupported
. Playback control - requires latest firmware, there are some notable limitations listed in full app description
. Auto-Exposure control
. Zebra and Focus Assist toggling from app - Pocket Cameras only
. Improved Slate input - you can now manually type Scene and Take values, instead of having to use the directional arrows
FIXES
. Fixed an issue on the latest firmware where the app would not know which camera model was connected, and present ISO, Resolution and Codec choices for the Ursa Mini Pro regardless of camera model.
. Improved Bluetooth connection when app enters background
version 1.5
posted on 2020-09-27
Sep 27, 2020 Version 1.5
Thanks everyone for your feedback and input. A good few things new in this update. It is strongly recommended that you are running the latest firmware from Blackmagic to enjoy the most reliable Bluetooth+ experience.
NEW FEATURES
. Ursa Mini Pro 12K support
. Zoom feature for supported lenses (generally MFT lenses + Pocket 4K)
. Stills capture button - requires latest firmware. Ursa Mini Pro G2 currently unsupported
. Playback control - requires latest firmware, there are some notable limitations listed in full app description
. Auto-Exposure control
. Zebra and Focus Assist toggling from app - Pocket Cameras only
. Improved Slate input - you can now manually type Scene and Take values, instead of having to use the directional arrows
FIXES
. Fixed an issue on the latest firmware where the app would not know which camera model was connected, and present ISO, Resolution and Codec choices for the Ursa Mini Pro regardless of camera model.
. Improved Bluetooth connection when app enters background
version 1.4
posted on 2020-02-21
Feb 21, 2020 Version 1.4
As always, a big thanks to all our users, and for those providing feedback. This update has some key improvements, including:
- Limited Focus support for EF mount cameras
- Due to hardware limitations, it is only possible to offset focus relative to its current position, so setting focus marks is not possible
- Smoothness of the focus will depend on the lens in use. Some EF lenses can be quite jerky
- This feature is primarily useful setting focus before shooting, and may not be smooth enough to pull focus during a take
- Much improved UI, with tabbed navigation and...
- Mini Menu
- See key settings all in one place
- Tap a setting to jump its page
- Just swipe to hide/show the menu
- A new setting to lock controls while recording
- A number of bug fixes and improvements
version 2.1
posted on 1970-01-01
2020年10月27日 Version 2.1
. Audio Level Controls, with some limitations:
- Levels can be set from Bluetooth+, but changes made on camera are not sent to the app, so we recommend validating settings before recording
- Input source selection is limited to either Internal Mics, or XLR
- Changing the Input Source setting on Ursa Mini Pro will change the setting for both audio channels, on Pocket Cameras it can only change Channel 1 input
. Added False Color control (currently supported on Pocket cams only)
. iPad UI fixes
MULTI-CAM MODE IS HERE
This represents a lot of work, and behind the scenes, a complete re-write of Bluetooth+
Multi-Cam Mode is available via a one-time in-app purchase. With Multi-Cam Mode, you'll get these fantastic features:
. Control up to 12 Blackmagic cameras at once
. Create up to 3 distinct Control Groups, to give you fine-grain control over different settings for different cameras
. You can choose to have changes made on one camera automatically update all the other cameras in its Control Group
. Give your cameras Nicknames for quick, easy control
Multi-Cam gives you control over the following features synced across the entire Group:
. Start/Stop Recording
. White Balance + Tint
. Project frame rate (off-speed frame rates not supported)
. Shutter Angle/Speed
. ISO
. Overlays (Zebras, Frame Guides, Grids, Focus Assist)
. Slate
. Trigger Auto-focus
You can still control all other settings on a camera-by-camera basis, including:
. Trigger stills capture
. Iris control
. Focus + Zoom (on supported lenses)
. Codec + Resolution
. Playback control
. You can also set ISO specifically, rather than by camera group, for cases where you may have a mix of Pocket cams and Ursa Minis in the same Control Group